IBM iAccess for Windows 7.1 (2024)

I'm trying to deploy iAccess 7.1 x64 via SCCM 2007 Task Sequence, I've created a software pacakge in sccm with the following command line:

setup.exe /S /v"REBOOT=REALLYSUPPRESS ADDLOCAL=dotnet,dt,odbc,oledb,dir,irc /qn /Li \"%temp%\IBM_CA_710_Install32.log\""

I can see from the log that the installation is indeed finished, but the msiexec.exe does not exit and the installation progress just sits there doing nothing. The command works just fine if I run it manually.

I've also tried using this command line, cwbinstall.msi is the msi extracted by "setup.exe" in the previous example.

msiexec.exe /I "cwbinstall.msi" /qn ADDLOCAL=dotnet,dt,odbc,oledb,dir,irc REBOOT=ReallySuppress

This one also works fine manually, but not in the ts environment. I can also add that i've tried running these commands as scripts, packages, "Run Command Line" directly in the Task Sequence, but to no avail.

Please, I really need some help!

Asked 11 years ago 15731 views

Software Deployment Package Development Microsoft System Center Configuration Manager (SCCM) Silent Install Commands IBM IBM iAccess IBM iAccess 7

1 Comment [ + ] Show comment

This is the end of the verbose logging, it even says Installation succeeded, but the Task Sequence step is stuck, if i kill the msiexec process and go into the OS the application does not work.. i get some DLL errors..
Property(S): REBOOT = REALLYSUPPRESS
Property(S): NLS_ERROR_Advertise_Not_Supported = The installation of IBM i Access for Windows does not support the advertisem*nt feature of Windows Installer. The install cannot continue.
Property(S): CWBMriMsiProdCode = {CCA40624-843E-48C6-B14F-E1070015D87C}
Property(S): CWBCurrentFixLevel = SI00000
Property(S): CWBCopiedLang = None
Property(S): CWBInstalliNavCfg = 0
Property(S): NLS_ERROR_SelfReg_4 = Reason: entry point %s was not found.
Property(S): NLS_ERROR_SelfReg_3 = Reason: could not load module. Return code %lu.
Property(S): NLS_ERROR_SelfReg_2 = Module %s failed to unregister.
Property(S): NLS_ERROR_SelfReg_1 = Module %s failed to register.
Property(S): NLS_ERROR_CannotUpgrade4 = The primary language version %s that is currently installed does not match any available language versions.
Property(S): NLS_ERROR_CannotUpgrade3 = To change the language to %s, remove the product and restart the install.
Property(S): NLS_ERROR_OosVRM_2 = You can upgrade to %s and then upgrade to this release or you can uninstall %s and then install this release.
Property(S): NLS_ERROR_OosVRM_1 = Upgrading from %s to this release is not supported.
Property(S): NLS_LAUNCH_CONDITION_OS64 = This version of [ProductName] requires that your computer is running a 32-bit version of Windows.
Property(S): PROGMSG_IIS_REMOVEWEBSITES = Removing IIS websites...
Property(S): PROGMSG_IIS_CREATEWEBSITE = Creating IIS website %s
Property(S): PROGMSG_IIS_CREATEWEBSITES = Creating IIS websites...
Property(S): CWBIsConsoleSession = 0
Property(S): ARPHELPLINK = http://www-03.ibm.com/systems/i/software/access/windows/support.html
Property(S): ARPURLUPDATEINFO = http://www-03.ibm.com/systems/i/software/access/windows/index.html
Property(S): ARPREADME = C:\Program Files (x86)\IBM\Client Access\MRI2924\readme.txt
Property(S): NLS_LAUNCH_CONDITION_OS = [ProductName] requires that your computer is running Windows XP Service Pack 2 or Windows Server 2003 Service Pack 1 or Windows Vista or Windows Server 2008.
Property(S): NLS_ConsoleRequiredWin2003 = An administrator session or console session is required to install from a Remote Desktop client depending on the operating system and service pack level. Start the session using: 'mstsc /console' or 'mstsc /admin'. For more details see Microsoft knowledge base document 947723.
Property(S): NLS_ERROR_DotNet_Upgrade = You must selectively uninstall the .Net Data Provider before you upgrade to a new release.
Property(S): NLS_Whatsnew_Shortcut_Name = What's New
Property(S): NLS_Error_Missing_Prereq_Patch = This service pack patch cannot be installed because a prerequisite patch is not present on this computer. Please download the %s patch installer from the IBM FTP site at ftp://ftp.software.ibm.com/as400/products/clientaccess/win32/%s/servicepack/%s. The %s patch installer contains this service pack plus the prerequisite patch.
Property(S): NLS_Whatsnew_Shortcut_Title = WHATSNEW|What's New
Property(S): ISReleaseFlags = 64bitA
Property(S): SETUPEXENAME = setup.exe
Property(S): ADDLOCAL = dotnet,dt,odbc,oledb,dir,irc,req
Property(S): ARPINSTALLLOCATION = C:\Program Files (x86)\IBM\Client Access\
Property(S): CWBPlgSilentExec = /SILENT
Property(S): CWBPRIMARYLANG = MRI2924
Property(S): CWBRunWelWizard = #0
Property(S): PackagecodeChanging = 1
Property(S): ProductState = -1
Property(S): TRANSFORMSATSOURCE = 1
Property(S): TRANSFORMSSECURE = 1
Property(S): SETUPEXEDIR = \\SRV1-CM-001.SERVICE.LOCAL\SMSPKGE$\C01002CE
Property(S): TRANSFORMS = @1033.MST
Property(S): AdminUser = 1
Property(S): RecacheTransforms = \\SRV1-CM-001.SERVICE.LOCAL\SMSPKGE$\C01002CE\1033.MST
Property(S): MsiLogFileLocation = C:\Windows\TEMP\IBM_CA_710_Install32.log
Property(S): PackageCode = {1FFAF998-D4C8-47E9-9F44-9CF382DE7B9A}
Property(S): COMPANYNAME = IT35
Property(S): USERNAME = End User
Property(S): CWBSupportedDotNetFound = True
Property(S): CWBSourceMRI29xxList = MRI2924
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): CWBAddPwsiMriFeatures = reqmri,dirmri,dtmri,ircmri,odbcmri,oledbmri,mpmri
Property(S): IS_CHAINER_POST_COMMANDLINE = /l"C:\Windows\TEMP\IBM_CA_710_Install32.log" /qb /i\\SRV1-CM-001.SERVICE.LOCAL\SMSPKGE$\C01002CE\MRI2924\cwbinmri.msi;"ALLUSERS=\"1\" ADDLOCAL=\"reqmri,dirmri,dtmri,ircmri,odbcmri,oledbmri,mpmri\" INSTALLDIR=\"C:\Program Files (x86)\IBM\Client Access\\\" ARPSYSTEMCOMPONENT=1 CWBOLDVRM=\"\" CWBLANG=\"MRI2924\""
Property(S): INSTALLDIR_NO_SLASH = C:\Program Files (x86)\IBM\Client Access
Property(S): INSTALLDIR_SHORT_NO_SLASH = C:\PROGRA~2\IBM\CLIENT~1
Property(S): MRI29XX_SHORT = C:\PROGRA~2\IBM\CLIENT~1\MRI2924\
Property(S): MRI29XX_NO_SLASH = C:\Program Files (x86)\IBM\Client Access\MRI2924
Property(S): ProductToBeRegistered = 1
MSI (s) (28:38) [09:24:46:528]: Note: 1: 1707
MSI (s) (28:38) [09:24:46:528]: Product: IBM i Access for Windows 7.1 -- Installation operation completed successfully.
MSI (s) (28:38) [09:24:46:528]: Windows Installer installed the product. Product Name: IBM i Access for Windows 7.1. Product Version: 07.01.0001. Product Language: 1033. Manufacturer: IBM. Installation success or error status: 0.
MSI (s) (28:38) [09:24:46:528]: Attempting to delete file C:\Windows\Installer\2f834.mst
MSI (s) (28:38) [09:24:46:528]: Unable to delete the file. LastError = 32
MSI (s) (28:38) [09:24:46:528]: Deferring clean up of packages/files, if any exist
MSI (s) (28:38) [09:24:46:528]: Attempting to delete file C:\Windows\Installer\2f834.mst
MSI (s) (28:38) [09:24:46:528]: MainEngineThread is returning 0
MSI (s) (28:3C) [09:24:46:528]: RESTART MANAGER: Session closed. - ggi3201 11 years ago

Answers (3)

Please log in to answer

Posted by: kingskawn 10 years ago

You found a solution to this?

Posted by: mukhtar 6 years ago

Put the Language e.g. "MRI2924" into the Image64a directory, making sure that Setup.ini file in MRI2924" is set to "EnableLangDlg=Y" then use the following here is my batch:

set myDIR=%SYSTEMDRIVE%\Logs

if not exist %myDIR% (mkdir %myDIR%)

Rem Run install

"%~dp0Image64a\setup.exe" /S /V"/qn TRANSFORMS="%~dp0Image64a\1033.mst" DISABLEAUTOUPDATE=1 ROOTDRIVE=C: REBOOT=ReallySuppress ALLUSERS=1 SETMULTIUSER=1 /liewa %myDIR%\IBMiAccessAlfa_7.1_R1_Install.log"

Rem Add a firewall rule to enable I Access to work

netsh advfirewall firewall add rule name="cwbunnav.exe for IBM iAccess Alfa 7.1" dir=in action=allow program="C:\program files (x86)\ibm\client access\cwbunnav.exe" enable=yes

netsh advfirewall firewall add rule name="javaw.exe for IBM iAccess Alfa 7.1" dir=in action=allow program="C:\program files (x86)\ibm\client access\jre\bin\javaw.exe" enable=yes

netsh advfirewall firewall add rule name="cwbopaoc.exe for IBM iAccess Alfa 7.1" dir=in action=allow program="C:\program files (x86)\ibm\client access\cwbopaoc.exe" enable=yes

EXIT

The uninstall is:

set myDIR=%SYSTEMDRIVE%\Logs

if not exist %myDIR% (mkdir %myDIR%)

MsiExec.exe /x{31E11496-1F84-4DCC-B07A-369B40B8B4A7} REBOOT=ReallySuppress MSIRESTARTMANAGERCONTROL=DisableShutdown MSIRESTARTMANAGERCONTROL=DisableShutdown /l*v! "%SystemDrive%\Logs\IBMiAccessAlfa_7.1_R1_Uninstall.log" /qn

MsiExec.exe /x{CCA40624-843E-48C6-B14F-E1070015D87C} REBOOT=ReallySuppress REBOOTPROMPT=Suppress MSIRESTARTMANAGERCONTROL=DisableShutdown /qn

MsiExec.exe /x{3186ACD0-B5C5-470E-ABE1-E4110C0A72BF} REBOOT=ReallySuppress REBOOTPROMPT=Suppress MSIRESTARTMANAGERCONTROL=DisableShutdown /qn

REM IF EXIST "C:\Program Files (x86)\IBM" (

REM RMDIR /S /Q "C:\Program Files (x86)\IBM"

REM ) ELSE (

REM Echo file is not there. 2>nul

REM )

netsh advfirewall firewall delete rule name="cwbunnav.exe for IBM iAccess Alfa 7.1"

netsh advfirewall firewall delete rule name="javaw.exe for IBM iAccess Alfa 7.1"

netsh advfirewall firewall delete rule name="cwbopaoc.exe for IBM iAccess Alfa 7.1"

EXIT

Posted by: jagadeish 11 years ago

Create an verbose log file for the installation and analyze it with WILogUtl.exe

Answer this question

Posted by:

ggi3201

Ninja since: 11 years ago

Don't be a Stranger!

View more:

Software Deployment Questions

question

IBM iAccess for Windows 7.1 (2024)

Answers (3)

Posted by:

Don't be a Stranger!

View more:

Related Questions

Related Links

Related Posts